LEXUS RX 300

1998-2003 of release

Repair and car operation



Лексус RX 300
+ Cars Lexus RX-300
+ Controls and operation receptions
+ Options and car routine maintenance
+ The engine
+ Systems of cooling of the engine, heating, ventilation and air conditioning
+ The power supply system and release of the fulfilled gases
+ Systems of an electric equipment of the engine
+ Automatic transmission and interaxal differential
+ Трансмиссионная a line
+ Brake system
+ Suspension bracket and steering
- Body
   - The external equipment and кузовные elements
      Removal and installation top распорки an impellent compartment
      Removal and installation of bumpers
      Removal and installation of a cowl, its lock and decorative lattice of a radiator
      Removal, installation, dismantling and assemblage of a forward door and its components
      Removal, installation, dismantling and assemblage of a back door and its components
      Removal, dismantling, assemblage and installation of a door of a back and its components
      Removal and installation of cleaners and обтекателя a windscreen
      Removal and installation молдингов
      Removal and spoiler installation
      Removal and installation of the top hatch
   + The salon equipment
+ Onboard electric equipment
+ Basic schemes of electric connections




Removal and installation of a cowl, its lock and decorative lattice of a radiator

Components of installation of a cowl

1 — a cowl Support
2 — the Cowl
3 — the Pillow
4 — the Decorative lattice of a radiator

5 — the Keeping hook
6 — cowl Isolation
7 — the Lever of a keeping hook
8 — Consolidation of a support of a radiator


 PERFORMANCE ORDER

  1. At installation of the cowl especially new, it is necessary to adjust its position.

At use of a centering bolt as a bolt of fastening of loops and the lock of a cowl the lock and a cowl to adjust it will not be possible. For adjustment replace aligning bolt with a usual bolt with a washer.

  1. For cowl adjustment in a horizontal plane give loopy bolts, expose a cowl in demanded position and tighten bolts with effort of 13 Nanometers.
  2. Adjustment of height of a forward part of a cowl is made by rotation of its basic pillows.
  1. Turn out 8 bolts and remove the top casing of a support.
  1. Turn out two bolts and a nut and remove the cowl lock, preliminary having disconnected from it приводной a cable.
  2. Grease rubbing parts of the lock of a cowl with universal greasing.
  1. By hand having tightened bolts and a nut, adjust position of the lock of a cowl then tighten fixture of the lock with demanded effort.