LEXUS RX 300

1998-2003 of release

Repair and car operation



Лексус RX 300
+ Cars Lexus RX-300
+ Controls and operation receptions
+ Options and car routine maintenance
+ The engine
+ Systems of cooling of the engine, heating, ventilation and air conditioning
+ The power supply system and release of the fulfilled gases
+ Systems of an electric equipment of the engine
+ Automatic transmission and interaxal differential
+ Трансмиссионная a line
+ Brake system
+ Suspension bracket and steering
- Body
   + The external equipment and кузовные elements
   - The salon equipment
      Removal and installation of the panel of devices and the main ware box
      Removal of a carpet covering of a floor and ware box of the central console
      Removal and installation of furnish of a ceiling
      Removal, dismantling, assemblage and installation of forward seats
      Removal, dismantling, assemblage and installation of back seats
      Removal and installation of seat belts and their emergency натяжителей
+ Onboard electric equipment
+ Basic schemes of electric connections




Removal and installation of seat belts and their emergency натяжителей

At separation of sockets SRS at the ignition key established in position «ON» or «ACC» in memory of the block of management the malfunction code is brought.

Components of installation of forward seat belts

1 — the Lining №1 top sections of furnish of the central rack of a body
2 — the Top section of furnish of the central rack of a body
3 — the Cover of the top anchor of a belt
4 — the Seat belt

5 — the Cover of the bottom anchor of a belt
6 — the Bottom section of furnish of the central rack of a body
7 — the belt Lock

Components of installation of back seat belts

1 — the Lateral belt
2 — the Central belt
3 — the Cover of the central belt
4 — the Lateral top finishing panel
5 — the Cover of a rack of a back suspension bracket
6 — the Back lateral panel of furnish
7 — the Bottom lateral panel
8 — the Cover №1 luggage spaces

9 — the Back panel of furnish of a luggage space
10 — the Right back seat
11 — Hooks
12 — Lateral furnish of a back seat
13 — the belt Lock
14 — the Protective casing of the mechanism of adjustment of an inclination of a back
15 — Assemblage of a pillow of a seat
16 — the Left back seat


 PERFORMANCE ORDER

  1. Remove overlays of thresholds and consolidation of forward and back doors.
  2. Remove both sections of furnish of the central rack of a body.
  3. Remove a cover of the bottom anchor of a forward belt then turn out a bolt and remove an anchor.
  4. Remove a cover of the top anchor of a forward belt then turn out a bolt and remove an anchor.
  5. Separate a socket of a reducer emergency натяжителя.
  1. Wring out a flat screw-driver the button of blocking of a socket натяжителя and separate a socket.
  1. Turn out 2 bolts and remove the belt lock.
  2. Procedure of removal of back seat belts is resulted in Section Removal, dismantling, assemblage and installation of back seats.
  3. Check up seat belts on presence of damages and if necessary replace them.
  4. Installation is made upside-down.

Use new components of system SRS.