LEXUS RX 300

1998-2003 of release

Repair and car operation



Лексус RX 300
+ Cars Lexus RX-300
+ Controls and operation receptions
- Options and car routine maintenance
   The general information
   The general data on options and adjustments
   The routine maintenance schedule
   Check of levels of liquids, the control of leaks
   Check of a condition of tyres and pressure of their rating, rotation of wheels
   Replacement of impellent oil and the oil filter
   The general checks of brake system
   Check and replacement салонного the filter of a heater and К/В
   Check of a condition and replacement of hoses of an impellent compartment, localisation of leaks
   Check of a condition and replacement of belts of a drive of auxiliary units
   Replacement of a filtering element of an air cleaner
   Check of a condition of system of release of the fulfilled gases
   Check and replacement of spark plugs
   Replacement of a brake liquid, prorolling of brake system
   Check of a condition of components of a suspension bracket and steering
   Check of a condition of protective covers of power shafts and hinges карданного a shaft
   Check of working capacity of lighting devices, horn and the heater fan
   System EVAP check
   Condition check, adjustment and replacement of brushes of screen wipers
   Check of a condition of the battery and care it
   Replacement of a cooling liquid (ОЖ)
   Check and adjustment клапанных backlashes
   Check and adjustment of a course of pedals of a working and lay brake
   Check of boots of a lay brake
+ The engine
+ Systems of cooling of the engine, heating, ventilation and air conditioning
+ The power supply system and release of the fulfilled gases
+ Systems of an electric equipment of the engine
+ Automatic transmission and interaxal differential
+ Трансмиссионная a line
+ Brake system
+ Suspension bracket and steering
+ Body
+ Onboard electric equipment
+ Basic schemes of electric connections




Check of a condition of the battery and care it

Address also to materials the Storage battery - the general information, recommendations about service Has undressed. The storage battery is placed at the left in a forward part of an impellent compartment.


At work with the battery it is necessary to undertake certain security measures. At battery banks always there is extremely an inflammable hydrogen, therefore do not suppose an arrangement about the battery of open fire. The battery electrolit represents a solution of sulfuric acid which at hit in eyes or on open sites of a body causes serious traumas. Besides, acid corrodes clothes and paints. At battery switching-off always the first disconnect a weight cable, and connect it in last turn!

Care of the battery is very important procedure, allowing to avoid stops in a way because of its discharge. For performance of procedure of service the corresponding tool is required.

 PERFORMANCE ORDER

  1. Before the beginning of procedure of service always at first switch off the engine and disconnect all electrodevices, then disconnect a cable of weight from the battery.
  2. Usually cars are equipped by the batteries which are not demanding special leaving. It is possible to remove covers банок and to add the distilled water. The batteries which absolutely not are not demanding leaving which are completely sealed can be established.
  3. Check up electrolit level in each of банок batteries – it should be between marks MIN and MAX on the battery case. If level of electrolit below norm, add only the distilled water and then close covers банок. If the battery of unattended type with the built in indicator is established, water addition is inadmissible.

Overflow банок can lead to transfusion of electrolit during the accelerated gymnastics that will cause corrosion and damage of the nearest to the battery a component.

  1. If the positive plug and a collar of a wire of the battery are equipped by a rubber protector, make sure, that it is not torn and not damaged. It should close the plug completely.
  2. It is necessary to examine periodically an external condition of the battery on presence of such damages, as cracks in the case.
  3. Check up reliability of a tightening of collars of wires of the battery, providing good electric connection. Check up each of wires on all length on presence of cracks and attritions of isolation and spending core.
  4. At detection of traces of corrosion (usually representing a friable touch of white colour) disconnect wires from plugs, smooth out their wire brush and again connect. Corrosion occurrence can be reduced to a minimum by installation of specially processed washers, or by drawing on plugs and collars of wires of a layer бескислотного vaseline or suitable greasing after their connection.
  5. Make sure, that the battery pallet is in a satisfactory condition, and the bolt of a fixing collar is reliably tightened. If the battery acted in film from the pallet, track, that in an installation time on it any extraneous subjects did not lay. At зажимании a fixing collar do not tighten its bolt too hardly.
  6. From the pallet, cases of the battery and surrounding surfaces it is possible to remove traces of corrosion by means of a water solution of baking soda. Put a mix a small brush, allow to it to stand and then смойте plentiful quantity of pure water.
  7. Metal surfaces of the car, подвергшиеся corrosion, it is necessary to cover with a first coat on a zinc basis and then to paint.
  8. The additional information on the battery and on start of the engine from the auxiliary power supply can be found accordingly in the Head of System of an electric equipment of the engine and in Introduction.