1998-2003 of release

Repair and car operation

Лексус RX 300
+ Cars Lexus RX-300
+ Controls and operation receptions
- Options and car routine maintenance
   The general information
   The general data on options and adjustments
   The routine maintenance schedule
   Check of levels of liquids, the control of leaks
   Check of a condition of tyres and pressure of their rating, rotation of wheels
   Replacement of impellent oil and the oil filter
   The general checks of brake system
   Check and replacement салонного the filter of a heater and К/В
   Check of a condition and replacement of hoses of an impellent compartment, localisation of leaks
   Check of a condition and replacement of belts of a drive of auxiliary units
   Replacement of a filtering element of an air cleaner
   Check of a condition of system of release of the fulfilled gases
   Check and replacement of spark plugs
   Replacement of a brake liquid, prorolling of brake system
   Check of a condition of components of a suspension bracket and steering
   Check of a condition of protective covers of power shafts and hinges карданного a shaft
   Check of working capacity of lighting devices, horn and the heater fan
   System EVAP check
   Condition check, adjustment and replacement of brushes of screen wipers
   Check of a condition of the battery and care it
   Replacement of a cooling liquid (ОЖ)
   Check and adjustment клапанных backlashes
   Check and adjustment of a course of pedals of a working and lay brake
   Check of boots of a lay brake
+ The engine
+ Systems of cooling of the engine, heating, ventilation and air conditioning
+ The power supply system and release of the fulfilled gases
+ Systems of an electric equipment of the engine
+ Automatic transmission and interaxal differential
+ Трансмиссионная a line
+ Brake system
+ Suspension bracket and steering
+ Body
+ Onboard electric equipment
+ Basic schemes of electric connections

Replacement of a cooling liquid (ОЖ)


  1. Remove the pallet картера.
  2. Wait cooling ОЖ and cautiously remove a radiator cover.
  1. Substitute capacity for gathering ОЖ under drain stoppers (1) in the engine and a radiator and lower ОЖ then tighten drain stoppers with demanded effort (see Specifications of Adjustment and car routine maintenance).
  1. Slowly fill system of cooling with the fresh cooling liquid corresponding to requirements of Specifications of the Head of Options and routine maintenance of the car.
  2. Establish a radiator cover, start the engine and allow to it to work.
  3. Switch off the engine and if necessary add ОЖ.
  4. Check up cooling system on presence of leaks ОЖ (the Section Check of levels of liquids, the control of leaks see).
  5. Establish the pallet картера.