Лексус RX 300
+ Cars Lexus RX-300
+ Controls and operation receptions
+ Options and car routine maintenance
- The engine
The general information and preparatory operations
Check компрессионного pressure
Check of the engine by means of the vacuum gauge
Reduction of the piston of the first cylinder in position of the top dead point (ВМТ)
Check of a corner of an advancing of ignition
Removal, check and installation of a belt of drive ГРМ it натяжителя, a pulley and a cogwheel of a cranked shaft, cogwheels of camshafts and intermediate rollers
Removal, dismantling, check, assemblage and installation of a head of cylinders and its components
Removal and engine installation, check of support
The block of cylinders
Check Д/В of pressure of impellent oil
Removal, dismantling, check, assemblage and installation of the oil pump and the pallet картера
+ Systems of cooling of the engine, heating, ventilation and air conditioning
+ The power supply system and release of the fulfilled gases
+ Systems of an electric equipment of the engine
+ Automatic transmission and interaxal differential
+ Трансмиссионная a line
+ Brake system
+ Suspension bracket and steering
+ Body
+ Onboard electric equipment
+ Basic schemes of electric connections
|
Check Д/В of pressure of impellent oil
Site Д/В of impellent oil
|
|
- Turn out Д/В and establish on its place a manometre.
- Warm up the engine to normal working temperature.
- Consider indications of a manometre and compare to requirements of Specifications of the Head the Engine.
- Remove a manometre and screw to the place of Д/В pressure of impellent oil, preliminary having greased its carving fixing hermetic, for example, Loctite 242.
- Tighten Д/В with effort of 13 Nanometers.
- Start the engine and make sure of absence of leaks of oil.
|
|
|
|
