Лексус RX 300
+ Cars Lexus RX-300
+ Controls and operation receptions
+ Options and car routine maintenance
+ The engine
+ Systems of cooling of the engine, heating, ventilation and air conditioning
- The power supply system and release of the fulfilled gases
- The power supply system
The general data and security measures
Сбрасывание pressure in fuel system
Principle of functioning of a control system of fuel injection
Checks of system of injection
Removal and installation of the fuel pump, the gauge of a stock of fuel and regulator of pressure of fuel
Removal and installation of fuel distributive highways and injectors
Removal and installation of a fuel tank and fuel lines
Removal and air cleaner installation
Removal, installation and adjustment of the case of a throttle and gauge TPS
Removal and installation of components of system ACIS
+ Systems of release and decrease in toxicity of the fulfilled gases
+ Systems of an electric equipment of the engine
+ Automatic transmission and interaxal differential
+ Трансмиссионная a line
+ Brake system
+ Suspension bracket and steering
+ Body
+ Onboard electric equipment
+ Basic schemes of electric connections
|
Removal and installation of components of system ACIS
System ACIS components
|
|
- Disconnect a vacuum hose from the activator and separate socket DLC №1.
- Give 4 nuts and remove socket DLC №1 from its arm. Disconnect a cable of weight and the tyre of grounding from valve ACIS.
- Hook valve ACIS a screw-driver and remove it with воздухораспределителя together with a lining.
|
|
-
At installation grease rubber parts with impellent oil and put прокладочный a material (№ 08826-0008 under catalogue Toyota/Lexus) on the specified sites of the valve. Use a new lining. Tighten nuts with effort of 14.5 Nanometers.
|
|
|
|
|
