LEXUS RX 300

1998-2003 of release

Repair and car operation


Лексус RX 300
+ Cars Lexus RX-300
+ Controls and operation receptions
+ Options and car routine maintenance
+ The engine
+ Systems of cooling of the engine, heating, ventilation and air conditioning
+ The power supply system and release of the fulfilled gases
+ Systems of an electric equipment of the engine
- Automatic transmission and interaxal differential
   The general information
   Search of malfunctions - the general information
   Replacement of gauges
   Removal and installation of assemblage of valves AT
   Checks and adjustments АТ
   Removal and installation of cooler ATF
   Removal and installation of assemblage of the lever of the selector of modes АТ
   Removal and installation АТ
+ Трансмиссионная a line
+ Brake system
+ Suspension bracket and steering
+ Body
+ Onboard electric equipment
+ Basic schemes of electric connections



Removal and installation of assemblage of the lever of the selector of modes АТ

Components of assemblage of the lever of the selector

1 — the Handle of the lever of the selector
2 — Заглушка handles of the lever of the selector
3 — the Plug of the handle of the lever of the selector
4 — the Spring
5 — the Button of the handle of the lever of the selector
6 — the Main switch of mode O/D
7 — the Lock core
8 — the Panel of indication of a mode
9 — Заглушка removals of blocking of the lever of the selector
10 — the Directing trench of electroconducting
11 — the Lateral cover
12 — the Pin
13 — the Spring of manual fixing
14 — the Switch of a mode of driving

15 — the Case of the bottom indicator of a mode
16 — the Saddle of a spring of the lever of the selector
17 — the Button of removal of blocking of the lever of the selector
18 — Auxiliary assemblage of the lever of the selector
19 — Демпфер vibrations
20 — Assemblage of the module of blocking of switching
21 — Draught of switching of modes
22 — the Plug
23 — the Insert №1 levers of the selector
24 — the Plate of the lever of the selector
25 — the Auxiliary plate of the lever of the selector
26 — the Spring nut
27 — Assemblage of a wire of indication of a mode
28 — the Lamp
29 — the Cap


 PERFORMANCE ORDER

  1. Remove following parts of furnish and the panel of devices (the Body see):
    • The bottom cover №2 right parts of the panel of devices;
    • The panel №2 right parts of the panel of devices;
    • The finishing panel of the bottom section of the panel of devices;
    • The bottom section of the panel of devices;
    • The bottom insert;
    • The bottom section of the central panel of devices together with an edging;
    • The right and left lateral covers of a covering of a floor;
    • The bottom panel of the central section of the panel of devices together with an edging;
    • The bottom finishing section central panels of devices.
  1. Turn out 4 nuts and disconnect a cable from assemblage of the lever of the selector of modes АТ.
  1. Separate three sockets of electroconducting and disconnect it from assemblage of the lever of the selector.
  2. Remove assemblage of the lever of the selector.
  3. If necessary dismantling and assemblage of the lever of selector AT make according to an illustration Components of assemblage of the lever of the selector.
  4. Installation of assemblage of the lever of the selector make upside-down.
  5. After installation check up serviceability of functioning of the lever of the selector (the Lever of the selector of modes АТ and the description of modes see an illustration).