1998-2003 of release

Repair and car operation

Лексус RX 300
+ Cars Lexus RX-300
+ Controls and operation receptions
- Options and car routine maintenance
   The general information
   The general data on options and adjustments
   The routine maintenance schedule
   Check of levels of liquids, the control of leaks
   Check of a condition of tyres and pressure of their rating, rotation of wheels
   Replacement of impellent oil and the oil filter
   The general checks of brake system
   Check and replacement салонного the filter of a heater and К/В
   Check of a condition and replacement of hoses of an impellent compartment, localisation of leaks
   Check of a condition and replacement of belts of a drive of auxiliary units
   Replacement of a filtering element of an air cleaner
   Check of a condition of system of release of the fulfilled gases
   Check and replacement of spark plugs
   Replacement of a brake liquid, prorolling of brake system
   Check of a condition of components of a suspension bracket and steering
   Check of a condition of protective covers of power shafts and hinges карданного a shaft
   Check of working capacity of lighting devices, horn and the heater fan
   System EVAP check
   Condition check, adjustment and replacement of brushes of screen wipers
   Check of a condition of the battery and care it
   Replacement of a cooling liquid (ОЖ)
   Check and adjustment клапанных backlashes
   Check and adjustment of a course of pedals of a working and lay brake
   Check of boots of a lay brake
+ The engine
+ Systems of cooling of the engine, heating, ventilation and air conditioning
+ The power supply system and release of the fulfilled gases
+ Systems of an electric equipment of the engine
+ Automatic transmission and interaxal differential
+ Трансмиссионная a line
+ Brake system
+ Suspension bracket and steering
+ Body
+ Onboard electric equipment
+ Basic schemes of electric connections

Check of working capacity of lighting devices, horn and the heater fan


  1. Include ignition and check up working capacity of all external lighting devices.
  2. By means of the assistant or having adjusted the car a backing to any wall, check up working capacity of stoplights. By pressing a brake pedal stoplights should be lighted only. Include all possible lighting devices located in back block headlights (backing lanterns, dimensional fires, etc.) then again press a brake pedal. If at inclusion of stoplights failure in work any of other included signals is found out, unreliable contact to weight or bad contact in a block headlight can be the reason for it.
  3. Now check up working capacity of head headlights. Include near, then a headlight.
  4. At detection of the fused lamps replace them.
  5. Check up working capacity of all internal lighting devices, including illumination of a ware box. Include ignition and be convinced that all control lamps have lighted up. In the Head Controls and operation receptions it is in detail described, what lamps should light up at ignition inclusion. Start the engine. Control lamps should go out. Making a trip to dark time of days, check up working capacity of all lamps of illumination.
  6. If the lamp has failed because of occurrence on it or on its cartridge of a rust replacement of a lamp will not solve such problem. In this connection, at replacement of any lamp, attentively examine a cartridge from within. At detection of adjournment of green or white colour remove their emery paper.
  7. Include the heater fan. It should work in all modes.
  8. In summary check up working capacity of a horn. The sound should be rather loud that participants of traffic could hear it.